FORUM

Our slip ratings that we apply to flooring surfaces are endorsed by the National Association of Testing Authorities (NATA) ensuring quality and consistency by qualified scientists that you can rely on. Commercial kitchens in Australia typically require R12 high slip resistance suitable for wet and greasy conditions. R ratings are determined using ramp testing under oil-contaminated conditions, while P ratings use pendulum testing in wet conditions. AS 4586 is the Australian Standard used to assess slip resistance of floor surfaces. Slip resistance measures how safely a floor surface performs underfoot, particularly in wet or contaminated condition  
  
Our Tools: IntegriScan   
IntegriScan’s unique technology facilitates reliable testing compared to vector mapping, archaic flood testing and spark testing (holiday testing). ELD is perfect for any building, property or application that relies on a waterproof membrane system Substrate inspections, thickness testing of membranes and the application of the membrane system help ensure compliance with all relevant Australian Standards. These inspections reference the relevant standard to ensure material selections are suitable for the application. Achieving compliance starts with review of architectural drawings to ensure compliance to relevant Australian Standard  
  
  
Detected breaches will need to be repaired before further testing can be carried out. Two probes are used to identify breaches and will always be directed to the strongest breach. Seams on sheet membranes are also difficult for this method to accurately test as the thickness at the seam is doubled; high voltage current cannot travel laterally through a seam defect. Testing must be carried out in perfectly dry conditions and should not be conducted in inclement conditions AS 4654.1 Waterproofing Membranes for External Above Ground Use Testing or when dew is present on the surface. With this form of testing as outlined in the ASTM D7877 guide, a special electrode brush is passed over the surface of the non-conductive membran  
  
Given Vector Mapping requires a constant flow of water over a substrate, vector mapping is not able to test vertical substrates – even with an additive in the water to create a film on a given vertical surface, the accuracy is still not reliabl  
  
SAA Approvals   
In addition, UL has established a voluntary certification system for Australia for the purpose of product safety verification. The company was founded in 1894 in Illinois, United States, and has branch offices in several cities in Australia. Underwriters Laboratories is an international corporation providing lab testing, product compliance accreditation services for a wide range of products and industries.  
The benefits of being a NATA accredited organisati  
  
ProtectSys   
AS/NZS 4858 is the primary Australian standard that relates to the physical performance properties of waterproofing membranes specified for use in wet areas such as bathrooms, kitchens, laundries and wet rooms, to prevent water ingress and protect structures from moisture damage. This is best achieved during construction where direct contact with the membrane can be achieved as trying to quantify waterproofing membrane performance once it is tiled or covered has its limitations and can be more costly to repair. Get a free quote for any of our services, from waterproofing inspections to frame inspections and more. Whether it’s a bathroom, balcony, basement, or rooftop, we have the expertise to ensure that your property stands strong against potential water damage. We check that your roof is not only protecting you from the rain but also ensuring that no water is seeping into the propert  
  
  
Another key facet of property compliance safety assessment is ensuring all people can navigate your property safely, including the vision impaired. Trusted by NDIS providers and property managers across Victoria for safety compliance. The specialists at Safe Environments provide independent NATA accredited floor slip test services to assess the risk of slip and fall accidents. Sliptest Australia is a leading independent slip testing company and we provide our services to commercial and private clients throughout Australia. In Australia, slip resistance is assessed under AS 4586 testing methods, which classify flooring based on performance in dry, wet or greasy environments. Every AS 4654.1 Waterproofing Membranes for External Above Ground Use Testing business should take preventive measures against slips, but those in industries with higher slip risks must ensure complianc  
  
  
High Voltage Membrane testing [sometimes referred to as spark testing or holiday testing]. However, not all ELD testing equipment can find breaches on vertical substrates, multiple horizontal breaches in a single test or test semi-conductive coatings – i.e. membranes such as Black EDPM, Black Butynol or polyurethanes tinted with Carbon black. Due to differing technology, methodology and some limitations of capability, these differing types of ELD testing units have the same basic requirements. ELD Testing is quick, and efficient and allows for repairs and retesting immediately reducing downtime on site.  
The Importance of Regular Waterproofing Inspections   
The benefits of ELD Testing against flood testing are numerous. This is the cheapest cost of time and materials to carry out the needed repairs. Download our easy 3-page brochure to understand how the Detec IntegriScan system works, how it compares to other testing methods & how it can protect your property. Contact Detec Australia today for a free assessment of the integrity of your waterproofing membrane. Detec Australia, serving the building industry since 2003, develops and provides leading-edge technology in the field of Electronic Leak Detection (ELD) internationally. The 16000m2 carpark being relatively had issues, so the owners decided to remove the topping slab and membrane, grind and prepare the are